Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"

## 环境信息

【OS版本】
openEuler-22.03-LTS，以及后期版本
【内核版本】
kernel-5.10.0-60.138.0.165，以及后期版本
【硬件平台】
鲲鹏920x
【组网信息】
海思sas + EXP组网 + 故障sata盘
【问题复现步骤】
1.  系统插入sata故障盘，此故障盘能正常建链，但是下IO失败，导致盘接入失败。
【实际结果】
盘循环接入
【期望结果】
接入失败后，不对盘反复接入。
【其他相关附件信息】
【已分析信息】
06:27:19  kernel: sas: ex 5c05064fff92101f phy11 change count has changed
06:27:19  kernel: hisi_sas_v3_hw 0000:74:02.0: dev[16:5] found
06:27:19  kernel: sas: Enter sas_scsi_recover_host busy: 0 failed: 0
06:27:21  kernel: hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=4064 task=        pK-error dev id=16 CQ hdr: 0x101d03 0x100fe0 0x0 0x4560000 Error info: 0x0 0x0 0x10000 0x0
06:27:21  kernel: ata18.00: failed to read native max address (err_mask=0x1)
06:27:21  kernel: ata18.00: HPA support seems broken, skipping HPA handling
06:27:28  kernel: hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=4086 task=        pK-error dev id=16 CQ hdr: 0x101d03 0x100ff6 0x0 0x4560000 Error info: 0x0 0x0 0x10000 0x0
06:27:28  kernel: ata18.00: READ LOG DMA EXT failed, trying PIO
06:27:28  kernel: hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=4087 task=        pK-error dev id=16 CQ hdr: 0x101d03 0x100ff7 0x0 0x4560000 Error info: 0x0 0x0 0x10000 0x0
06:27:28  kernel: ata18.00: NCQ Send/Recv Log not supported
06:27:28  kernel: hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=4088 task=        pK-error dev id=16 CQ hdr: 0x101d03 0x100ff8 0x0 0x4560000 Error info: 0x0 0x0 0x10000 0x0
06:27:28  kernel: ata18.00: NCQ Send/Recv Log not supported
06:27:28  kernel: ata18.00: ATA-11: WUH721816ALE6L4, PCGAW8C2, max UDMA/133
06:27:28  kernel: ata18.00: 31251759104 sectors, multi 0: LBA48 NCQ (depth 32)
06:27:28  kernel: hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=4089 task=        pK-error dev id=16 CQ hdr: 0x203 0x100ff9 0x0 0x100 Error info: 0x0 0x0 0x0 0x0
06:27:28  kernel: ata18.00: failed to set xfermode (err_mask=0x4)
06:27:28  kernel: ata18.00: limiting speed to UDMA/133:PIO3
06:27:36  kernel: hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=4033 task=        pK-error dev id=16 CQ hdr: 0x101d03 0x100fc1 0x0 0x4560000 Error info: 0x0 0x0 0x10000 0x0
06:27:36  kernel: ata18.00: NCQ Send/Recv Log not supported
06:27:36  kernel: hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=4034 task=        pK-error dev id=16 CQ hdr: 0x101d03 0x100fc2 0x0 0x4560000 Error info: 0x0 0x0 0x10000 0x0
06:27:36  kernel: ata18.00: NCQ Send/Recv Log not supported
06:27:36  kernel: hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=4035 task=        pK-error dev id=16 CQ hdr: 0x203 0x100fc3 0x0 0x100 Error info: 0x0 0x0 0x0 0x0
06:27:36  kernel: ata18.00: failed to set xfermode (err_mask=0x4)
06:27:36  kernel: ata18.00: disabled
06:27:36  kernel: sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
06:27:36  kernel: sas: sas_probe_sata: for exp-attached device 5c05064fff92100b returned -19
06:27:36  kernel: hisi_sas_v3_hw 0000:74:02.0: dev[16:5] is gone
06:27:36  kernel: sas: ex 5c05064fff92101f phy11 change count has changed
06:27:36  kernel: hisi_sas_v3_hw 0000:74:02.0: dev[17:5] found
06:27:36  kernel: sas: Enter sas_scsi_recover_host busy: 0 failed: 0
06:27:38  kernel: hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=4057 task=        pK-error dev id=17 CQ hdr: 0x101d03 0x110fd9 0x0 0x4560000 Error info: 0x0 0x0 0x10000 0x0
06:27:38  kernel: ata19.00: failed to read native max address (err_mask=0x1)
06:27:38  kernel: ata19.00: HPA support seems broken, skipping HPA handling
06:27:46  kernel: hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=4079 task=        pK-error dev id=17 CQ hdr: 0x101d03 0x110fef 0x0 0x4560000 Error info: 0x0 0x0 0x10000 0x0
06:27:46  kernel: ata19.00: READ LOG DMA EXT failed, trying PIO
06:27:46  kernel: hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=4080 task=        pK-error dev id=17 CQ hdr: 0x101d03 0x110ff0 0x0 0x4560000 Error info: 0x0 0x0 0x10000 0x0
06:27:46  kernel: ata19.00: NCQ Send/Recv Log not supported
06:27:46  kernel: hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=4081 task=        pK-error dev id=17 CQ hdr: 0x101d03 0x110ff1 0x0 0x4560000 Error info: 0x0 0x0 0x10000 0x0
06:27:46  kernel: ata19.00: NCQ Send/Recv Log not supported
06:27:46  kernel: ata19.00: ATA-11: WUH721816ALE6L4, PCGAW8C2, max UDMA/133
06:27:46  kernel: ata19.00: 31251759104 sectors, multi 0: LBA48 NCQ (depth 32)
06:27:46  kernel: hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=4082 task=        pK-error dev id=17 CQ hdr: 0x203 0x110ff2 0x0 0x100 Error info: 0x0 0x0 0x0 0x0
06:27:46  kernel: ata19.00: failed to set xfermode (err_mask=0x4)
06:27:46  kernel: ata19.00: limiting speed to UDMA/133:PIO3
06:27:53  kernel: hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=4026 task=        pK-error dev id=17 CQ hdr: 0x101d03 0x110fba 0x0 0x4560000 Error info: 0x0 0x0 0x10000 0x0
06:27:53  kernel: ata19.00: NCQ Send/Recv Log not supported
06:27:53  kernel: hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=4027 task=        pK-error dev id=17 CQ hdr: 0x101d03 0x110fbb 0x0 0x4560000 Error info: 0x0 0x0 0x10000 0x0
06:27:53  kernel: ata19.00: NCQ Send/Recv Log not supported
06:27:53  kernel: hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=4028 task=        pK-error dev id=17 CQ hdr: 0x203 0x110fbc 0x0 0x100 Error info: 0x0 0x0 0x0 0x0
06:27:53  kernel: ata19.00: failed to set xfermode (err_mask=0x4)
06:27:53  kernel: ata19.00: disabled
06:27:53  kernel: sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
06:27:53  kernel: sas: sas_probe_sata: for exp-attached device 5c05064fff92100b returned -19
**二、缺陷分析结构反馈**
影响性分析说明：

缺陷严重等级:(Critical/High/Moderate/Low)

缺陷根因说明:

受影响版本排查(受影响/不受影响):
openEuler-20.03-LTS-SP4
openEuler-22.03-LTS-SP3
openEuler-22.03-LTS-SP4
openEuler-24.03-LTS
openEuler-24.03-LTS-SP1
openEuler-24.03-LTS-SP2

修复是否涉及abi变化(是/否):
openEuler-20.03-LTS-SP4
openEuler-22.03-LTS-SP3
openEuler-22.03-LTS-SP4
openEuler-24.03-LTS
openEuler-24.03-LTS-SP1
openEuler-24.03-LTS-SP2

GVP openEuler/kernel

内容风险标识

评论 (3)

GVPopenEuler/kernel

内容风险标识